IS200DSFCG1A GE Driver Shunt Feedback Board Mark VI Turbine Control

IS200DSFCG1A GE Driver Shunt Feedback Board Mark VI Turbine Control

Product Details:

Description:

IS200DSFCG1A is a Driver Shunt Feedback Board designed and developed by GE. It belongs to General Electric's Speedtronic Mark VI series. The Driver Shunt Feedback Board have features such as MOV protection, jumper pins for customization, current sensing and fault detection circuits, galvanic and optical isolation, compatibility with Innovation SeriesTM source bridges and AC drives, and precise mounting and orientation requirements. These features collectively contribute to the board's reliability, functionality, and effectiveness in drive/source applications, providing essential control and feedback capabilities for power conversion systems.

Located near the upper left corner of the PCB, the board incorporates a circular red Metal Oxide Varistor (MOV). This component helps protect the board and the connected circuitry from transient voltage spikes or surges by diverting excessive electrical energy to ground. The IS200DSFCG1A printed circuit board is designed for GE Turbine applications. Positioned near the upper left part of the PCB is one circular red metal oxide varistor or MOV. The designator LCB is printed on the board near the MOV. A series of solid black resistors are situated right under the MOV.

A total of four of the resistors have been placed around black transistor which is shaped like a square. Sitting close to these components is one small solid red light-emitting diode or LED. Printed on the board right above the light-emitting diode are the words LINK ABOVE 50V. Two large components which are metal are situated close to the bottom left side of the IS200DSFCG1A. The two metal components are identified with the labels UGB and UEB. Six jumper pins are featured close to the upper center of the IS200DSFCG1A in three pairs. Every pair of jumper pins is labeled with designators like PL, PL1, and PL2. One square component which is large is situated on the right half of the IS200DSFCG1A. The square component is black on the side and silver on the top. Placed on the IS200DSFCG1A card are a series of integrated circuits. Around ten integrated circuits are placed on the PCB which may be small, medium, or large.

This IS200DSFCG1AEB PCB makes use of a normal style of Mark VI Series assembly that coats individual IS200DSFCG1AEB hardware components based on their manufacturer-perceived functional priority. The IS200DSFCG1AEB is a Shunt Feedback Board/IGBT Gate Driver that was created and marketed by GE as part of their Speedtronic Mark VI system. The Mark VI Series is a flexible management platform for gas and steam turbine industrial systems of various sizes and complexity. This IS200DSFCG1AEB Shunt Feedback Board's greater Mark VI Turbine Control System Series is additionally valued on greater relevant markets for its status as one of the final-developed GE Mark product series to incorporate the patented Speedtronic control system technology into a number of its different offerings.