GE DS200IQXDG1A Speedtronic Mark VI IGBT Q DB Snubber Module Controller System

GE DS200IQXDG1A Speedtronic Mark VI IGBT Q DB Snubber Module Controller System

Product Details:

Description:

The SPEEDTRONIC Mark V gas turbine control system is specifically designed for GE gas and steam turbines, and uses a considerable number of CMOS and VLSI chips selected to minimize power dissipation and maximize functionality. The new design dissipates less power than previous generations for equivalent panels. Ambient air at the panel inlet vents should be between 32 F and 72 F (0 C and 40 C) with a humidity between 5 and 95%, non-condensing. The standard panel is a NEMA 1A panel that is 90 inches high, 54 inches wide, 20 inches deep, and weighs approximately 1,200 pounds. Figure 11 shows the panel with doors closed.

The DS200IQXDG1A is a circuit board manufactured by General Electric for use within its Mark V Speedtronic system. The Mark V is a microprocessor-based gas and steam turbine-control system. It was specifically designed for use on medium to large turbines, single or two-shaft heavy-duty gas turbines, and aero-derivative gas turbines. The MKV is a triple redundant system that uses three redundant control processors; this allows any one of these processors or its components to be repaired without shutting down the turbine system. The DS200IQXDG1A is typically used within an EX2000 subset of the Mark V, and is edited from its original performance specifications and dimenstions through its assembly's inclusion of an A-rated functional product revision.

The previous information represents about the extent of original DS200IQXDG1A Snubber Card hardware specification information that can be retrieved from the product's original instructional manual materials and a visual inspection. Due to the low general availability of this DS200IQXDG1A device's original pertinent instructional manual materials, the DS200IQXDG1A functional product number itself can be considered a strong source of DS200IQXDG1A Inverter Snubber Card hardware information. The DS200IQXDG1A functional product number begins with the DS200 Series tag detailing this DS200IQXDG1A product's normal Mark V Series assembly style and domestic location of original manufacturer.

This tag is followed in the DS200IQXDG1A functional product number by an instance of the IQXD functional product abbreviation, which was created to exist as an accessible shorthand promotional and conversational alternative to the lengthy DS200IQXDG1A functional product number. This IQXD functional acronym is itself followed in the DS200IQXDG1A product number by another dual-functional naming component in the G1 series grouping tag exposing this DS200IQXDG1A Card's normal style of PCB coating and its group one Mark V Series grouping.